Bullet Proof Sentry Post – Balaji Textiles

Guarded & Secured

Designed and Made in India

The Balaji Textiles Bulletproof Sentry Post is a fortified position fabricated from Armor Steel. The Sentry Post comes in three distinct variants, each suited to a different operational requirement.

Employability

The Sentry Post is made of rugged components and can be erected and dismantled in a short time. With multiple observation and firing slots, the Sentry Post gives an unparalleled advantage in controlling and denying access to sensitive installations and facilities.

Protection

The Balaji Textiles Bulletproof Sentry Post provides protection against fire assault of small arms of NIJ Level III rating. Model 1 protects from the front and flanks with a bulletproof roof of the same protection level, whereas Models 2 and 3 afford all-round protection.

Features :

At the lower segment of the cabin, the bullet-proof (B.P) steel plate of 6.5mm thickness should cover 48” height and 48” width on each of the three sides of armour coverage.
At the middle segment of the cabin, the bullet-proof (B.P) glass of 50 mm thickness should cover 24” height and 48” width on all the three sides of armour coverage.
The firing slots between the lower B.P steel segment and the middle B.P glass segment should be of 6” height on each of all the three sides of armour coverage.
The upper segment of the cabin above the B.P glass segment will be made of plain, transparent toughened glass of 10 mm thickness.
The framework will be of M.S steel square pipe.
Protection level–III as per Requirements (protection from 7.62 mm SLR or AK-47 bullets or splinters of 36HE hand grenade from 10 metres)Complete outer area of roof will be made of FRP
Complete Outer & Inner area of the B.P. Steel will be covered with water-proof plywood.
The outer colour on the lower B.P steel segment will be of blue and red stripes.
Fan & CFL Lamp with provision for electrical connection will be fitted inside the cabin.
Approximate weight of the security cabin should be 475 kg +/- 5% All steel items should have protective anti-rust coating.
The door on rear-side should be made of FRP and of dimension 6-feet height and 2.5 feet width without Bullet Proof Material.
Minimum internal height should be 8 feet.
The outer surface of the roof should be such that water should not stagnate, while the cabin will give a flat-top-surface appearance.